Softlite Softboard 3 Fin Set

Description

Softlite Softboard 3 Fin Set

The Softlite Softboard 3 Fin Set is a replacement fin set of fins for your softboard. So it’s great to have on hand in case you lose or damage a fin. The set consists of three softboard fins. Constructed of plastic they reduce the risk of harm as they’re soft and have a lot of flex. If you hit an object they’ll bend so not damage you or your board. Boards with these fins are allowed to be used inside the flags, unlike boards with the hard fins that are considered dangerous to swimmers. These fins will be a close match to those that come originally on a wide range of softboards. A way to determine if these fins will fit your board is to check if there’s screw plugs on the top deck of your board where the fins are located. If yes, these fins should work.

Easy Fit Screws

Along with the fins you get the required attachment screws. There are two screws per fin. The screws are also plastic so will not corrode or rust. The screws come with a flat screw head. They go through your softboard, inserted into the existing hole. The plastic is good quality with a generous thread so it’s easy to screw in. However you should check screw depth before you insert and start to tighten the screw as if your board is thinner in the tail you can reduce the height of the screw thread if necessary. A coin or flat head screwdriver is normally used so tightening is easy.

It’s good to have the Softlite Softboard 3 Fin Kit on hand in the advent of a mishap while surfing or on holidays. So, you can easily replace the fin and keep surfing. The set includes a legrope holder as part of the pack. If you’ve any doubt over the suitability or fitting of these fins please come in-store and we’ll help so you’ll have no problems. Check our full range of Surfboard Fins at Manly Surfboards>Surfboard Fins