FCS II Pivot PG Single Longboard Fin

Description

FCS II Pivot PG Single Longboard Fin

The FCS II Pivot PG Single Longboard Fin gives a fun & performance feel to your longboard, Mal, Mid Length or 2 + 1. These FCS 2 Longboard fins are designed to fit in an adjustable Longboard rear fin box. So they won’t work in a normal FCS or FCS II fin setup. There’s several features that make these fins great. The shape is upright. So you get a lot of pivot.

Dropping to the bottom and jamming, the fin will put you into a fast short arc turn. Jamming off the top you’ll get the same pivot and release. So you get dynamic top to bottom surfing. The FCS 2 single fin depth gives good hold but as the fin body is thin and flexi you’ll also get a lot of carve in the wave.

Holding rail the fin will help draw your line, give a bit of release, and then slide loosening up your tail. The FCS II Connect PG Longboard Fin gives you similar great performance so these are some of the best Longboard fins Australia has to offer.

Key-Less Install

The fin base of the FCS II Pivot PG is FCS’ own FCS II Tool-Less Longboard System. This is a revolution in itself. It means you don’t need any tool at all to fit the fin into your fin box. No hex key or screwdriver. With this FCS special design the fin pops in and out.

This is a great feature as you can easily move your fin around even out in the surf. Your rear fin box you’ll notice is around 10 inches long. Yet you never use all that space. With this fin you can super easily without any tools pop your fin out and move it. Even in the surf.

So moving it forward will give a feeling of looseness. Moving it back you’ll feel more drive and carve. So without tools you can adjust fin position these FCS 2 Longboard fins and realise the full potential of your board and your surfing.

The FCS II Pivot has a great construction. PG stands for Performance Glass and means there’s a great fiberglass feel close to that of traditional fins. So you get all the benefits of great flex and response along with the latest FCS Tool-Less system.

The FCS II Pivot PG Single Fin fits most Longboard adjustable fin boxes so will likely fit your existing board. There’s also the FCS II Connect PG Longboard Fin that has the similar key-less base and great performance. Check our full range of some of the best Longboard Fins Australia has to offer at Manly Surfboards>Surfboard Fins