FCS II Carver PC Tri Fin Set
The FCS II Carver PC Tri Fin Set gives you powerful down the line drivey surfing. These FCS 2 Fins gives you what you need for point and reef break waves. The Carver is a taller fin with a pronounced sweep so you can charge down the line. Sweep means the fins lean towards the back. So along with a fuller tip you get exceptional control.
There’s a flat foil on the inside of the outer fins so you get consistency and predictability. This is great for power surfers who push hard against their surfboard fins and draw out their turns. You’ll find you get more projection with the FCS II Carver PC Tri Fins. This gets you down the line so making fast sections and barrels.
Down The Line Drive
PC refers to the construction of the fin, Performance Core. So these Thruster Fins have the feel of traditional fibreglass fins with the added performance of reduced weight. Able to handle a wide variety of conditions so you’ll perform best with these FCS 2 Fins in walling waves with open faces. This fin will give you the best performance from your board with extra concave and extra rocker.
These fins only come in the FCS 2 Carver Fins Large and Medium sizes. Note, the FCS II Carver PC Tri Fins are for exclusive use with the FCS II Fin System so will not fit in the traditional FCS Dual Plug System. To find out more on how FCS can power your surfing check here: FCS Surf Advantage
Specs of these surfboard fins are as follows:
FCS 2 Carver Fins Medium Base: 4.47″ / 113mm Depth: 4.54″ / 115mm Area: 14.96″² / 9650 mm² Sweep: 37° Foil: Flat
FCS 2 Carver Fins Large Base: 4.58″ / 116mm Depth: 4.66″ / 118mm Area: 14.96″² / 10150 mm² Sweep: 37° Foil: Flat