Cruiser Foamy Fin and Screw Set


The Cruiser Foamy Fin and Screw Set gives you a complete set of Thruster fins to fit most Softboards. Fin depth can be adjusted by clipping the length of the plastic screw

Category: Brand:


Cruiser Foamy Fin and Screw Set

The Cruiser Foamy Fin and Screw Set gives you a full replacement fin set for your Softboard. This includes 3 fins which make a Thruster setup, and the screw plugs to attach the fins to your board. There’s a few variations of fin system for Softboards, so if you’re unsure these fins are for you please contact us.

Constructed of plastic these fins reduce the risk of harm as they’re soft and have a lot of flex. If you hit an object they’ll bend so not damage you or your board. While flagged areas are off-limits to boards with fins, Softboards with these fins are generally okay. So giving you an extra area you can surf. Though always show care and caution toward swimmers.

A way to determine if these fins will fit your board is to check if there’s screw plugs on the top deck of your board where the fins are located. If yes, these fins should work. Also you can check screw depth before you insert and start to tighten the screws as on thinner tail boards you can reduce the height of the screw thread if necessary.

To tighten the screws you can use a coin or flat-head screwdriver. It’s good to have the Softlite Softboard 3 Fin Kit on hand in the advent of a mishap while surfing. So, you can easily replace the fin and keep surfing. Check our full range of Surfboard Fins at Manly Surfboards>Surfboard Fins

Additional information

Weight .5 kg
Dimensions 20 × 20 × 10 cm


There are no reviews yet.

Be the first to review “Cruiser Foamy Fin and Screw Set”

You may also like…