Futures T1 Alpha Twin Fin Set

Description

Futures T1 Alpha Twin Fin Set

The Futures T1 Alpha Twin Fin Set is specifically designed for modern fish boards. So the design gives you a balance between down the line high speed and the ability to crank turns as needed. It’s all in the setup of the two side fins. They’re upright giving you the ability to pivot more. So you can push into more vertical turns. They’ve also got a beak that gives you a lot of area for hold and drive. The sweep in the tip gives a down the line edge so you’ll still maintain forward momentum through turns. There’s also a smaller rear fin. So you can give your board a touch of a thruster feel, planting your back foot back for bigger changes of direction.

The Alpha material consists of carbon and air uniquely infused in the fin. It’s not carbon strips like older style application. The carbon particles can be varied in density from the base to the tip. The base is stiffer with more carbon giving super drive. The tip is flexi so you get spontaneous release. It’s all controlled by the carbon density in a power gradient. So you get smoothly controlled performance under your foot. Without sacrificing strength. In addition, the Alpha has a new 3D texture featured on the trailing edge. This reduces turbulence and drag so you get speed. The fin is noticeably fast and super light. Lighter than honeycomb. The fins feature the Futures Truss Base. Designed to break under impact the truss reduces the risk of injury or board damage. To find out more on how Futures can power your surfing check here: Future fins – Surf Better

Specs

Specs are as follows: Side Fins- Height: 5.14″ Base: 4.8″ Area: 19.79″ Side Fin Foil: Flat Rear Fin Height: 3.26″ Base: 3.18″ Area: 7.19″ Foil: Symmetrical