FCS II Carver PC Carbon Tri Fin Set

Description

FCS II Carver PC Carbon Tri Fin Set

The FCS II Carver PC Carbon Tri Fin Set gives you epic carving. It’s part of the FCS Essentials fin range so highly recommended for your high performance surfing. The design optimises your performance in point and reef break waves. The way it does this is by being taller and having a pronounced sweep. Sweep means the fin curves to the back so you get super projection down the line. The FCS II Carver PC Tri Fins set also has a fuller tip so with its extra height you get exceptional control off the bottom and on the open face. The sizes are FCS 2 Carver Fins Large and Medium, there’s no Small.

Exceptional Drive

The FCS II Carver has a flat foil on the inside of the outer fins so you get consistency and predictability. This is great for power surfers who push hard. So the more you push the more the fin drives forward. There’s no quirky flex point. PC Carbon means the FCS II Carver PC Carbon Set has a fiberglass construction like traditional surfboard fins. Added to this is a carbon fibre layer so you get a stiffer flex.

Able to handle a wide variety of conditions, you’ll perform best with these FCS Thruster Fins in open face walling waves. This fin is designed so you get the best performance from your board with deep concave and extra rocker. The FCS II Carver PC Tri Fins set is for exclusive use with the FCS II Fin System. So it will not fit in the traditional FCS Dual Plug System. To find out more on how FCS can power your surfing check here: FCS Surf Advantage

Specs of these surfboard fins are as follows:

FCS 2 Carver Fins Medium Base: 4.​47″ / 113mm Depth: 4.54″ / 115mm Area: 1​4.96″² / 9650 mm² Sweep: 37° Foil: Flat

FCS 2 Carver Fins Large Base: 4.​58″ / 116mm Depth: 4.66″ / 118mm Area: 1​4.96″² / 10150 mm² Sweep: 37° Foil: Flat