FK Lorider Grip


FK Lowrider Tail Pad. Extra sensitive with low 2.5mm traction pattern, high arch and mid height kick. Get the sensitivity to really feel your board and setup critical moves.

Category: Brand:


FK Lorider Grip

The FK Lorider Grip is a tail pad that gives you extra sensitive traction. The design features 2.5mm high rectangles and grooves that are lower than most traction patterns. This gives you close contact feel with your board. When you press and shift weight you get sensitivity and instant response. In addition deep side grooves act like ribs anchoring your foot on the side pieces as you push.

The 3 piece design has two side pieces. You can expand these separately placing them closer to your board’s rails. So your narrow and wide tail boards get optimal coverage. The center piece is relatively wide providing a good base. It has high 10mm arch with Trident bar grooves so the inside of your foot will get great support and grip. This high arch gives great support.

The FK Lorider Grip tail has a 26mm high kick so you can place the edge of your foot up against it and carve. The kick has a rolled top that will help your foot naturally slide down into the sweet spot at the front of the kick. There’s an semi-circle incut at the tail so you can place this grip close to the end of your board.

The edges of the grip are rolled. This gives you better water flow and release. High quality adhesive means the pad will stay put once applied. The pad has EVA construction so while providing great traction you get minimal irritation on your knee and thigh. To find out more on how FK Far King can power your surfing check here: FK Surf Essentials.

Additional information

Weight .3 kg
Dimensions 30 × 30 × 15 cm


There are no reviews yet.

Be the first to review “FK Lorider Grip”

You may also like…